Methods to prevent oil return from brushless motors.
In many mechanical equipment nowadays, motors are very important devices. With the development of the mechanical industry, the types of motor equipment in China have been continuously increasing in recent years, which has played a very important role in promoting the development of China's motor industry. The application of DC brushless motors in the motor equipment industry is very extensive. As a very important motor equipment, there may be oil backflow when using DC brushless motors. The next thing we need to know is some methods to prevent oil backflow in DC brushless motors.
1. Separate the oil near the exhaust valve of the brushless DC motor from other oils, with the oil level only slightly higher than the partition wall.
2. Move the fuel tank and exhaust valve to the side to lower the oil level and reduce the fuel volume.
3. The flat surface of the DC brushless motor base should be flat, and the valve plate should be elastic.
4. Add a pipe to the oil hole so that the oil level is only slightly higher than the inlet.
5. Set up a check valve mechanism for the brushless DC motor, which automatically closes the oil inlet when the motor is stopped.
6. Install an inflation valve at the motor port of the brushless DC motor.
By using the methods introduced in the above article, it is possible to effectively prevent oil backflow in brushless DC motors. Have you learned the specific operating methods after reading the article? Our company produces a wide variety of motor equipment, and the brushless DC motor introduced earlier is just one of them. If you want to learn more about brushless DC motor equipment or other motor equipment, please follow us more!
Keywords:
